As things start to go back to normal, I had forgotten that I had made a wrap for the Radiomaster T16S. As time went by I never clued in that I wasn’t selling any until someone messaged me and asked for one. Huge mistake on my part but the item has been combined with the Jumper Wraps as the template only changed slightly for Radiomaster. You should be able to use the Jumper T16 video for both Transmitters. Apologies for the oversight.
DJI Combo, I made a wrap and felt that too many people were breaking the drone so I scrapped the Drone wraps as my wrap tends to overlap for best coverage. This would have made it difficult for the customer to salvage or take only part of the wrap-off. I do have the goggle wrap that works for V1 and V2 Same Template. As for the Transmitter, I just haven’t had the time to upload it to the site, it is also one that I question and feel might be too hard to put on for the regular Joe, the goal was to make it at least 80% coverage. I have accomplished this task but again is it too hard for the average joe to install? I will make a video, footage has been taken just not put together and narrated. When I release the video and product you can decide if you want to give it a try.
Also, I’ve noticed a fair bit of competition popping off with DJI Wraps and it’s been good for business here. What I want people to know is that nxgraphics is a one-man operation and I cannot compete with Decal Girl, I won’t have a race to the bottom, they have some nice items at really low pricing. I sell 80-90% full-coverage wraps vs semi-half wraps. The market has room for everyone and wanted to say thank you to the customers that continue to support my one-man opperation.
One more thing, I have seen some really nice DJI goggle wraps that are one piece and require you to stretch the sticker on. I am certain that your wrap will lift over time, especially in warm weather as you can’t just pull and stretch a sticker onto a complex item like the DJI Goggle. The idea is great but short-term at best.
So what seems like an eternity to get back on my feet with my shop, I am going to try to reopen. I’m worried about the United States Shipping as I can only offer regular Canada post to keep costs down for you the customer. It’s also ridiculous how much it costs to send a simple envelope any faster. So if you order please be sure you can wait 🙂
I am putting up versions of the DJI FPV goggle wrap, Remote Wrap and HDO2
I have held back releasing these wraps due to COVID, motivation, mental health, and the cloners. I wanted to make the cloners sweat and come up with their own versions. As expected the cloners sit and rotate while they wait or clone someone else’s work. I hope that I can get a large distributor to notice my work and hope to get more of my product out in the world.
I hope this works out as self motivation just keeps getting lower and lower, who knows these might be my last items i make as i struggle with my Rheumatoid Arthritis.
Anyway lack of updates for anyone that reads these i apologies sincerely…
Alright as some of you have already noticed, I have dropped the Tango 2 skins before the HDO2 and DJI Goggles. The timing was a little unexpected and I chose to roll with that first. Also, my Cloaner friends will have to wait longer as it looks like none of them want to be innovative to release anything. I will be giving myself some more time to do a little R&R and hope to have lots of skins for spring.
I’ve also caught a gaming illness of late, it’s called EFT and I have to say that this has been a good distraction overwork as I usually just work and don’t really have any me time to myself. For those waiting for releases, I am selfishly taking my time but also want to make sure I put out a good product everyone can install without swearing 😛
What’s happening in 2020? I plan on working on DJI, ORQA and FatShark Goggles. It is a huge time savage, i hope i can start rolling out by the end of January or sooner.
I have access to DJI Now but i have been sick and pretty much hit that year end wall.
ORQA, i will be working with someone to make these happen, i won’t be buying them as they are out of my scope.
Fatsharks i need to get a hold of a set locally same thing i won’t be buying them as they are out of my scope also, i believe the designs it pretty much the same but IPD area is different and the visor no longer has a switch. If someone wants to tape and trace these 2 areas for me and get the ball rolling that would be helpful 🙂
Wings i don’t think i will continue making wraps for wings other than the ritewing mini that i worked on last year. Time spent making template, materials needed to make, ship and also have an attractive price is just not there to make it worth while. Shipping Wing wraps from Canada sucks for packages and having to answer emails about shipping cost or why i can’t offer international tracking just ruins it for me and is a time waste 🙁 I am not large enough of a company to get those sweet DHL Rates.
I have also delayed working on some of these things to give my fellow known cloners a chance to innovate something on their own, so far still nothing 😉
Happy new year and safe travels wherever you are. All the Best in 2020.
Again thanks for the support from the community and special thanks to my local and international FPV group of friends that push me to the limit 🥳🥳
Before I went on holiday I managed to get a template done for both of these Transmitters. When I came back I had a ton of work to get out and I fell behind. I am currently working on a MT44 to add to the ground transmitters and I’m looking at getting some of my older work up on the site over the coming winter that’s fast approaching. As FPV dies down here locally I need to focus on my off-road and on-road products. If you are looking for something specific please let me know, contact me via facebook page NXGRAPHICS.
I have also had some interest in the new Nano Drak Wing, I’m currently spent on buying new products. If you are someone with $$$ and want something templated you can always send me the product to work on. Anyone in Canada with items that want to be wrapped, that I don’t have a template for please let me know we can work something out. I would offer free wrap installed and free shipping back within Canada.
Yup still slacking with updates, in the following week i should have a couple Mini Wraps up for sale. Working on shipping quotes. Getting the installation video made, Social media response such as Facebook slightly growing nothing crazy but way more than imagined. Below is a picture of when i first started this project, frantic drawing logo placement and lettering to Installed in the monitor to a digitized concept pattern. More someday!
*** little side note for anyone that might be confused about the store*** I was putting updates in the wrong section of my website so basically talking to my self, we are no longer down anymore for anyone still wondering. Full steam ahead, lots of projects here at home and also new ones lined up that relate to FPV.
Looks like i will be shut down for the holidays do to an extreme amount of Data LOSS. Last orders that did not get worked on will be refunded immediately. I will hopefully be able to take on orders in January 2019. Apologies and happy holidays to all of you. Thank you all for the support
For anyone that got affected by the down time here is a coupon code for 15% off any order above 20 bucks, sale ends May 20th. Coupon Code : FPVS15
I keep forgetting to post here, so we had some issues where the website would not send out a completion order emails and then i would have to answer emails if orders were being shipped out or not. Rest assure we sent out all orders and also looked into why this was happening. In short our site needed upgrades, we did that and something went wrong. Go figure, site was down for almost a week but in the end it was much needed and things are back to normal. It also let me unplug for a bit and catch up on much needed sleep 😛
If anyone was trying to get a hold of me recently at the time when the site was down. Please re submit your request in case it was missed. Apologies for the inconvenience the down time might of caused.